NR LDPC Encoder

Perform LDPC encoding according to 5G NR standard

Library:
Wireless HDL Toolbox / Error Detection and Correction

Description

The NR LPDC Encoder block implements a low-density parity-check (LDPC) encoder with hardware-friendly control signals. The block accepts data bits, a stream of control signals, a base graph number, and lifting sizes. The block outputs encoded bits, a stream of control signals, lifting sizes, and a signal that indicates when the block is ready to accept new inputs.

The block functionality matches that of the function nrLDPCEncode (5G Toolbox). You can use this block for channel coding of downlink and uplink shared channels and paging channel according to 5G new radio (NR) standard TS 38.212 [1].

The block supports scalar and vector inputs. The block provides an architecture suitable for HDL code generation and hardware deployment. For more information, see Algorithms.

Ports

Input

expand all

`data` — Input data bits
scalar | vector

Input data bits, specified as a scalar or a column vector of size 64.

For more information on how to specify vector input data, see Specifying Vector Input.

Data Types: Boolean

`ctrl` — Control signals accompanying sample stream
`samplecontrol` bus

Control signals accompanying the sample stream, specified as a samplecontrol bus. The bus includes the start, end, and valid control signals, which indicate the boundaries of the frame and the validity of the samples.

start — Indicates the start of the input frame
end — Indicates the end of the input frame
valid — Indicates that the data on the input data port is valid

For more detail, see Sample Control Bus.

Data Types: bus

`bgn` — Base graph number
scalar

Base graph number, specified as a scalar. When this value is 0, the block applies bgn 1. When this value is 1, the block applies bgn 2. For more information about bgn 1 and bgn 2, see section 5.3.2, of TS 38.212 [1].

Data Types: Boolean

`liftingSize` — Input lifting size
scalar

Input lifting size, specified as a scalar.

For an invalid liftingSize value, the block discards the current frame and waits for the new frame.

For more information about the supported lifting size values, see section 5.3.2, of TS 38.212 [1].

Data Types: uint16

Output

expand all

`data` — Encoded output data bits
scalar | vector

Encoded output data bits, returned as a scalar or a column vector of size 64.

The block outputs data bits in a similar format as the input data bits.

Data Types: Boolean

`ctrl` — Control signals accompanying sample stream
`samplecontrol` bus

Control signals accompanying the sample stream, returned as a samplecontrol bus. The bus includes the start, end, and valid control signals, which indicate the boundaries of the frame and the validity of the samples.

start — Indicates the start of the output frame
end — Indicates the end of the output frame
valid — Indicates that the data on the output data port is valid

For more detail, see Sample Control Bus.

Data Types: bus

`liftingSize` — Output lifting size
scalar

Output lifting size, returned as a scalar.

Data Types: uint16

`nextFrame` — Ready for new inputs
scalar

The block sets this signal to 1 when the block is ready to accept the start of the next frame. If the block receives an input start signal while nextFrame is 0, the block discards the frame in progress and begins processing the new data.

For more information, see Using the nextFrame Output Signal.

Data Types: Boolean

Model Examples

LDPC Encode and Decode of Streaming Data

Simulate the NR LDPC Encoder and NR LDPC Decoder Simulink® blocks and compare the hardware-optimized results with the results from the 5G Toolbox™ functions. These blocks support scalar and vector inputs. The NR LDPC Decoder block enables you to select either Min-sum or Normalized min-sum algorithm for decoding operation.

More About

expand all

Specifying Vector Input

Vector input data for the block must be specified as a column vector of size 64. You must provide inputs as an integer number of ceil(liftingSize/64) clock cycles.

The total number of clock cycles that the block requires to receive a frame of data bits for encoding is equal to n x ceil(liftingSize/64), where n is the number of columns in the parity check matrix. n depends on the base graph number, specified by the bgn input port. When the bgn port value is 0, the block sets n to 22. When the bgn port value is 1, the block sets n to 10.

These sections show how the block accepts input data bits based on the liftingSize and bgn port values.

liftingSize input value is less than 64 and bgn value is 0

For a liftingSize input value of 2, the block accepts the first two data input bits in each clock cycle and ignores the remaining 62 elements in that clock cycle. The total number of clock cycles the block requires to receive input data bits is 22.

The D_n elements represent data bits, and the X elements represent ignored values.

Input data bits	Number of Clock Cycles
Input data bits	1 Clock Cycle	2 Clock Cycles	3 Clock Cycles	4 Clock Cycles	...	21 Clock Cycles	22 Clock Cycles
`data[0]`	D₀	D₂	D₄	D₆	...	...	D₄₂
`data[1]`	D₁	D₃	D₅	D₇	...	...	D₄₃
...	X	X	X	X	X	X	X
...	X	X	X	X	X	X	X
`data[63]`	X	X	X	X	X	X	X

liftingSize input value is greater than 64 and bgn value is 0

For a liftingSize input value of 104, the block accepts 104 data bits in two clock cycles: 64 data bits in the first clock cycle and 40 data bits in the second clock cycle. The block ignores the remaining 24 elements in the second clock cycle. The total number of clock cycles the block requires to receive input data bits is 44.

The D_n elements represent data bits, and the X elements represent ignored values.

Input data bits	Number of Clock Cycles
Input data bits	1 Clock Cycle	2 Clock Cycles	3 Clock Cycles	4 Clock Cycles	...	...	43 Clock Cycles	44 Clock Cycles
`data[0]`	D₀	D₆₄	D₁₀₄	D₁₆₈	...	...	D₂₁₈₄	D₂₂₄₈
`data[1]`	D₁	D₆₅	D₁₀₅	D₁₆₉	...	...	D₂₁₈₅	D₂₂₄₉
	...	...	...		...	...	...	...
...	...	D₁₀₃	...	D₂₀₇	...	...	...	D₂₂₈₇
...	...	X	...	X	...	...	...	X
`data[63]`	D₆₃	X	D₁₆₇	X	...	...	D₂₂₄₇	X

Algorithms

expand all

This figure shows the architecture block diagram of the NR LDPC Encoder block.

The architecture consists of Controller, Check Matrix LUT, Shifter, Memory, Nonnegative Position Selector, and XOR Unit blocks. The Controller block controls the data flow to and from the Memory block and provides control signals to control the functionality of all of these blocks. The Check Matrix LUT block consists of 5G NR LDPC standard [1] parity check matrix values. Based on the bgn and liftingSize input port values, the Check Matrix LUT block provides input to the Shifter block. The Systematic Parity Generator block generates parity bits for the first four rows of the parity check matrix and uses those generated parity bits to calculate the parity bits for the remaining rows of the parity check matrix. The Nonnegative Position Selector block selects the nonnegative positions of the parity check matrix. The XOR Unit block performs the modulo operation by completing the encoding operation.

Latency

The latency of the block varies based on the values of the bgn and liftingSize input ports. Because the latency varies, use the nextFrame control signal to determine when the block is ready for a new input frame.

Scalar Input

This figure shows a sample output of the NR LDPC Encoder block with latency. In this case, the bgn and liftingSize input port values are set to 1 and 384, respectively. The latency of the block is 1,840 clock cycles.

Vector Input

This figure shows a sample output of the NR LDPC Encoder block with latency. In this case, the bgn and liftingSize input port values are set to 0 and 384, respectively. The latency of the block is 1,911 clock cycles.

Performance

The performance of the synthesized HDL code varies with your target and synthesis options.

This table shows the resource and performance data synthesis results. The generated HDL is targeted to the Xilinx^® Zynq^®- 7000 ZC706 evaluation board.

Input Data	Slice LUTs	Slice Registers	Block RAMs	Maximum Frequency in MHz
Scalar	6748	7084	2.5	431
Vector	7951	8504	3.5	430

References

[1] 3GPP TS 38.212. “NR; Multiplexing and Channel Coding.” 3rd Generation Partnership Project; Technical Specification Group Radio Access Network.

[2] Gallager, R. “Low-Density Parity-Check Codes.” IEEE Transactions on Information Theory 8, no. 1 (January 1962): 21–28. www.doi.org/10.1109/TIT.1962.1057683.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

This block supports C/C++ code generation for Simulink^® accelerator and rapid accelerator modes and for DPI component generation.

HDL Code Generation
Generate Verilog and VHDL code for FPGA and ASIC designs using HDL Coder™.

HDL Coder™ provides additional configuration options that affect HDL implementation and synthesized logic.

HDL Architecture

This block has a single, default HDL architecture.

HDL Block Properties

ConstrainedOutputPipeline	Number of registers to place at the outputs by moving existing delays within your design. Distributed pipelining does not redistribute these registers. The default is `0`. For more details, see ConstrainedOutputPipeline (HDL Coder).
InputPipeline	Number of input pipeline stages to insert in the generated code. Distributed pipelining and constrained output pipelining can move these registers. The default is `0`. For more details, see InputPipeline (HDL Coder).
OutputPipeline	Number of output pipeline stages to insert in the generated code. Distributed pipelining and constrained output pipelining can move these registers. The default is `0`. For more details, see OutputPipeline (HDL Coder).

Restrictions

You cannot generate HDL for this block inside a Resettable Synchronous Subsystem (HDL Coder).

Documentation

NR LDPC Encoder

Description

Ports

Input

`data` — Input data bits
scalar | vector

`ctrl` — Control signals accompanying sample stream
`samplecontrol` bus

`bgn` — Base graph number
scalar

`liftingSize` — Input lifting size
scalar

Output

`data` — Encoded output data bits
scalar | vector

`ctrl` — Control signals accompanying sample stream
`samplecontrol` bus

`liftingSize` — Output lifting size
scalar

`nextFrame` — Ready for new inputs
scalar

Model Examples

LDPC Encode and Decode of Streaming Data

More About

Specifying Vector Input

Algorithms

Latency

Performance

References

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

HDL Code Generation
Generate Verilog and VHDL code for FPGA and ASIC designs using HDL Coder™.

See Also

Blocks

Functions

Wireless HDL Toolbox Documentation

Support

Documentation

NR LDPC Encoder

Description

Ports

Input

data — Input data bits scalar | vector

ctrl — Control signals accompanying sample stream samplecontrol bus

bgn — Base graph number scalar

liftingSize — Input lifting size scalar

Output

data — Encoded output data bits scalar | vector

ctrl — Control signals accompanying sample stream samplecontrol bus

liftingSize — Output lifting size scalar

nextFrame — Ready for new inputs scalar

Model Examples

LDPC Encode and Decode of Streaming Data

More About

Specifying Vector Input

Algorithms

Latency

Performance

References

Extended Capabilities

C/C++ Code Generation Generate C and C++ code using Simulink® Coder™.

HDL Code Generation Generate Verilog and VHDL code for FPGA and ASIC designs using HDL Coder™.

See Also

Blocks

Functions

Wireless HDL Toolbox Documentation

Support

`data` — Input data bits
scalar | vector

`ctrl` — Control signals accompanying sample stream
`samplecontrol` bus

`bgn` — Base graph number
scalar

`liftingSize` — Input lifting size
scalar

`data` — Encoded output data bits
scalar | vector

`ctrl` — Control signals accompanying sample stream
`samplecontrol` bus

`liftingSize` — Output lifting size
scalar

`nextFrame` — Ready for new inputs
scalar

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

HDL Code Generation
Generate Verilog and VHDL code for FPGA and ASIC designs using HDL Coder™.