Schedule Execution of Multiple Controllers

A Simulink^® function is a graphical object that you fill with Simulink blocks and call in the actions of states and transitions. Simulink functions are supported only in Stateflow^® charts in Simulink models. For more information, see Reuse Simulink Components in Stateflow Charts.

Goal of the Tutorial

The goal of this tutorial is to use Simulink functions in a Stateflow chart to improve the design of a model named sf_temporal_logic_scheduler.

Rationale for Improving the Model Design

The sf_temporal_logic_scheduler model contains a Stateflow chart and three function-call subsystems. These blocks interact as follows:

The chart broadcasts the output events A1, A2, and A3 to trigger the function-call subsystems.
The subsystems A1, A2, and A3 execute at different rates defined by the chart.
The subsystem outputs feed directly into the chart.
No other blocks in the model access the subsystem outputs.

You can replace function-call subsystems with Simulink functions inside a chart when:

The subsystems perform calculations required by the chart.
Other blocks in the model do not need access to the subsystem outputs.

Edit a Model to Use Simulink Functions

The sections that follow describe how to replace function-call subsystem blocks in a Simulink model with Simulink functions in a Stateflow chart. This procedure reduces the number of objects in the model while retaining the same simulation results.

Step	Task	Reference
1	Open the model.	Open the Model
2	Move the contents of the function-call subsystems into Simulink functions in the chart.	Add Simulink Functions to the Chart
3	Change the scope of specific chart-level data to `Local`.	Change the Scope of Chart Data
4	Replace event broadcasts with function calls.	Update State Actions in the Chart
5	Verify that function inputs and outputs are defined.	Add Data to the Chart
6	Remove unused items in the model.	Remove Unused Items in the Model

Note

To skip the conversion steps, you can access the new model directly.

Open the Model

Open the sf_temporal_logic_scheduler model. If you simulate the model, you see this result in the scope.

For more information, see Schedule Subsystems to Execute at Specific Times.

Add Simulink Functions to the Chart

Follow these steps to add Simulink functions to the Temporal Logic Scheduler chart.

In the Simulink model, right-click the A1 block in the lower right corner and select Cut from the context menu.
Open the Temporal Logic Scheduler chart.
In the chart, right-click outside any states and select Paste from the context menu.
Expand the new Simulink function so that the signature fits inside the function box.
Tip
To change the font size of a function, right-click the function box and select a new size from the Font Size menu.
Rename the Simulink function from A1 to f1 by entering y = f1(u) in the function box.
Repeat steps 1 through 5 for these cases:
- Copying the contents of A2 into a Simulink function named f2.
- Copying the contents of A3 into a Simulink function named f3.
Note
The new functions reside at the chart level because both states FastScheduler and SlowScheduler require access to the function outputs.

Change the Scope of Chart Data

In the Model Explorer, change the scope of chart-level data y to Local because the calculation for that data now occurs inside the chart.

Update State Actions in the Chart

In the Stateflow Editor, you can replace event broadcasts in state actions with function calls.

Edit the state actions in FastScheduler and SlowScheduler to call the Simulink functions f1, f2, and f3.
In both states, update each during action as follows.
```
du: y = u1-y2;
```

Add Data to the Chart

For the on every state actions of FastScheduler and SlowScheduler, define three data. (For details, see Add Stateflow Data.)

Add local data y1 and y2 to the chart.
Add output data y3 to the chart.
In the model, connect the outport for y3 to the inport of the scope.
Tip
To flip the Scope block, right-click and select Rotate & Flip > Flip Block from the context menu.

Remove Unused Items in the Model

In the Model Explorer, delete output events A1, A2, and A3 and input data u2 because the function-call subsystems no longer exist.
Delete any dashed signal lines from your model.

Documentation