Translational Friction
Friction in contact between moving bodies
Library
Mechanical Translational Elements
Description
The Translational Friction block represents friction in contact between moving bodies. The friction force is simulated as a function of relative velocity and is assumed to be the sum of Stribeck, Coulomb, and viscous components, as shown in the following figure.
The Stribeck friction, FS, is the negatively sloped characteristics taking place at low velocities (see [1]). The Coulomb friction, FC, results in a constant force at any velocity. The viscous friction, FV, opposes motion with the force directly proportional to the relative velocity. The sum of the Coulomb and Stribeck frictions at the vicinity of zero velocity is often referred to as the breakaway friction, Fbrk. The friction is approximated with the following equations:
where
| F | Friction force |
| FC | Coulomb friction |
| Fbrk | Breakaway friction |
| vbrk | Breakaway friction velocity |
| vSt | Stribeck velocity threshold |
| vCoul | Coulomb velocity threshold |
| vR, vC | Absolute velocities of terminals R and C, respectively |
| v | Relative velocity |
| f | Viscous friction coefficient |
The exponential function used in the Stribeck portion of the force equation is continuous and decays at velocity magnitudes greater than the breakaway friction velocity.
The hyperbolic tangent function used in the Coulomb portion of the force equation ensures that the equation is smooth and continuous through v = 0, but quickly reaches its full value at nonzero velocities.
The block positive direction is from port R to port C. This means that if the port R velocity is greater than that of port C, the block transmits force from R to C.
Variables
To set the priority and initial target values for the block variables prior to simulation, use the Variables tab in the block dialog box (or the Variables section in the block Property Inspector). For more information, see Set Priority and Initial Target for Block Variables.
Parameters
- Breakaway friction force
The breakaway friction force, which is the sum of the Coulomb and the static frictions. It must be greater than or equal to the Coulomb friction force value. The default value is
25N.- Breakaway friction velocity
The velocity at which the Stribeck friction is at its peak. At this point, the sum of the Stribeck and Coulomb friction is the Breakaway friction force. The default value is
0.1m/s.- Coulomb friction force
The Coulomb friction force, which is the friction that opposes motion with a constant force at any velocity. The default value is
20N.- Viscous friction coefficient
Proportionality coefficient between the friction force and the relative velocity. The parameter value must be greater than or equal to zero. The default value is
100N/(m/s).
Ports
The block has the following ports:
RMechanical translational conserving port.
CMechanical translational conserving port.
References
[1] B. Armstrong, C.C. de Wit, Friction Modeling and Compensation, The Control Handbook, CRC Press, 1995