effearthradius

Effective earth radius

collapse all in page

Syntax

Re = effearthradius
Re = effearthradius(refgrad)
Re = effearthradius(R,ha,ht)
Re = effearthradius(R,ha,ht,'SurfaceRefractivity',ns)
Re = effearthradius(R,ha,ht,___,'BreakPointAltitude',altbp)
Re = effearthradius(R,ha,ht,___,'BreakPointRefractivity',npb)
[Re,k] = effearthradius(___)

Description

example

Re = effearthradius returns the effective radius, Re, of a spherical earth, computed from the gradient of the index of refraction of the atmosphere. This syntax uses the default value of -39e-9 for the gradient, making the effective radius approximately 4/3 of the actual earth radius. For more information about the computation, see Effective Earth Radius from Refractivity Gradient.

example

Re = effearthradius(refgrad) computes the effective radius from the specified gradient of the refractivity, refgrad, of the atmosphere.

example

Re = effearthradius(R,ha,ht) returns the effective Earth radius, Re, using the average radius of curvature method (see [1]). R is the line-of-sight range to the target. ha is the radar altitude above mean sea level (MSL). ht is the target altitude above MSL. See Effective Earth Radius from Average Radius of Curvature.

example

Re = effearthradius(R,ha,ht,'SurfaceRefractivity',ns) also specifies the scalar surface refractivity, ns for the average radius of curvature method. See Effective Earth Radius from Average Radius of Curvature.

example

Re = effearthradius(R,ha,ht,___,'BreakPointAltitude',altbp) also specifies the altitude of the convergence point, altbp, for the average radius of curvature method.

example

Re = effearthradius(R,ha,ht,___,'BreakPointRefractivity',npb) also specifies the refractivity at the convergence point, npb, for the average radius of curvature method.

example

[Re,k] = effearthradius(___) also outputs the effective radius factor, k. Use this option with any of the syntaxes described above. See Effective Earth Radius.

Examples

collapse all

Open Live Script

Return the default effective earth radius due to atmospheric refraction.

re = effearthradius
re = 8.4774e+06

Compute the ratio of the effective earth radius to the actual earth radius.

r = physconst('EarthRadius');
disp(re/r)
    1.3306
Open Live Script

Compute the effective earth radius from a specified refractivity gradient, -40e-9.

rgrad = -40e-9;
re = effearthradius(rgrad)
re = 8.5498e+06
Open Live Script

Calculate the effective Earth radii for a radar positioned at sea level aimed at two targets. The first target is at 8000 meters above sea level at a range of 100 km. The second target is at 9000 meters altitude at a range of 200 km.

rng = [100e3,200e3];
ha = [0];
ht = [8.0e3, 9.0e3];
re = effearthradius(rng,ha,ht)
re = 1×2
106 ×

    7.4342    7.3525
Open Live Script

Calculate the effective Earth radii for a radar positioned at sea level and aimed at two targets. The first target is at 8000 meters above sea level at a range of 100 km. The second target is at 9000 meters altitude at a range of 200 km. Specify the surface refractivity as 100.0 N-units.

rng = [100e3,200e3];
ha = [0,0];
ht = [8.0e3,9.0e3];
re = effearthradius(rng,ha,ht,'SurfaceRefractivity',100)
re = 1×2
106 ×

    6.3582    6.3582
Open Live Script

Calculate the effective Earth radii for a radar positioned at sea level aimed at two targets. The first target is at 8000 meters above sea level at a range of 100 km. The second target is at 9000 meters altitude at a range of 200 km. The breakpoint altitude is 10000.0 meters and the surface refractivity is 350 N-units.

rng = [100e3,200e3];
ha = [0,0];
ht = [8.0e3,9.0e3];
re = effearthradius(rng,ha,ht,'SurfaceRefractivity',350.0, ...
    'BreakPointAltitude',10000.0)
re = 1×2
106 ×

    7.5877    7.4917
Open Live Script

Calculate the effective Earth radii for a radar positioned at sea level and aimed at two targets. The first target is at 8000 meters above sea level at a range of 100 km. The second target is at 9000 meters altitude at a range of 200 km. The breakpoint altitude is 10000.0 meters, the breakpoint refractivity is 300 N-units, and the surface refractivity is 375 N-units.

rng = [100e3,200e3];
ha = 0;
ht = [8.0e3, 9.0e3];
re = effearthradius(rng,ha,ht,'SurfaceRefractivity',375, ...
    'BreakPointAltitude',10e3,'BreakPointRefractivity',300)
re = 1×2
106 ×

    6.6962    6.6930
Open Live Script

Calculate the effective Earth radius factors for a radar positioned at sea level aimed at two targets. The first target is at 8000 meters above sea level at a range of 100 km. The second target is at 9000 meters altitude at a range of 200 km. The break point altitude is one kilometer, the breakpoint refractivity is 300.0 N-units, and the surface refractivity is 350.0 N-units. 

rng = [100e3,200e3];
ha = [0,0];
ht = [8.0e3,9.0e3];
[re,k] = effearthradius(rng,ha,ht,'SurfaceRefractivity',350.0, ...
    'BreakPointAltitude',1000.0,'BreakPointRefractivity',300.0)
re = 1×2
106 ×

    7.7113    7.5724


k = 1×2

    1.2104    1.1886

Input Arguments

collapse all

Refractivity gradient, specified as a scalar. Units are in N-units/meter.

Data Types: double

Line-of-sight range to the target from the radar, specified as a positive scalar or a 1-by-M vector of positive values. M must be the same for R, ha, and ht. However, if one of R, ha, and ht is a scalar and another is a 1-by-M vector, the scalar is expanded into a 1-by-M vector. Units are in meters.

Data Types: double

Radar altitude above mean sea level, specified as a scalar or a 1-by-M vector. M must be the same for R, ha, and ht. However, if one of R, ha, and ht is a scalar and another is a 1-by-M vector, the scalar is expanded into a 1-by-M vector. Units are in meters.

Data Types: double

Target altitude above mean sea level, specified as a scalar or an M-length vector. M must be the same R, ha, and ht. However, if one of R, ha, and ht is a scalar and another is a 1-by-M vector, the scalar is expanded into a 1-by-M vector. Units are in meters.

Data Types: double

Scalar surface refractivity, specified as a positive scalar. Units are N-units.

Dependencies

To enable this argument, use the syntax specifying 'SurfaceRefractivity'.

Data Types: double

Convergence point altitude, specified as a scalar. The convergence point altitude defaults to 12192 meters when any of the input altitudes specified in ha or ht are greater than 9144 meters. Otherwise, it defaults to 9144 meters. Setting the 'BreakPointAltitude' and 'BreakPointRefractivity' values can be used to tune the output to measured refraction values. For more information, see Effective Earth Radius from Average Radius of Curvature. Units are in meters.

Dependencies

To enable this argument, use the syntax specifying 'BreakPointAltitude'.

Data Types: double

Convergence point refractivity, specified as a scalar. The refractivity defaults to 66.65 N-units when any of the input altitudes specified in ha or ht are greater than 9144 meters. Otherwise, the default is 102.9. Setting the 'BreakPointAltitude' and 'BreakPointRefractivity' values can be used to tune the output to measured refraction values. For more information, see Effective Earth Radius from Average Radius of Curvature. Units are N-units.

Dependencies

To enable this argument, use the syntax specifying 'BreakPointRefractivity'.

Data Types: double

Output Arguments

collapse all

Effective earth radius, returned as a positive scalar. Units are in meters.

Effective earth radius factor, returned as a positive scalar. The effective earth radius factor is the ratio of the effective earth radius to the physical earth radius. Units are dimensionless.

Data Types: double

More About

collapse all

Effective Earth Radius

The effective earth radius method is an approximation used for modelling refraction effects in the troposphere. Changing the radius of the earth can account for refraction effects. The effective radius method ignores other types of propagation phenomena such as ducting. A related quantity, the effective earth radius factor, is the ratio of the effective earth radius to the actual earth radius.

k=Rer

where r is the actual earth radius and Re is the effective earth radius. Commonly, the effective earth radius factor, k, is chosen as 4/3. However, at long ranges and with shallow angles, k can deviate greatly from the 4/3. (With no atmospheric refraction, k = 1. An infinite value for k represents a flat Earth). The effearthradius function provides two methods for calculating the effective earth radius: the refractivity gradient method and the average radius of curvature method.

Effective Earth Radius from Refractivity Gradient

An estimate of the effective earth radius factor, k, can be derived from the refractivity gradient using

k=11+r⋅refgrad

where r is the actual earth radius in meters. refgrad is the gradient of the index of refraction specified by the refgrad argument. The index of refraction for a given altitude is the ratio of the free-space propagation speed of electromagnetic waves to the propagation speed in air at that altitude. The gradient is the rate of change of the index of refraction with altitude. The value of 4/3 corresponds to an index of refraction gradient of −39×10−9 m−1.

Effective Earth Radius from Average Radius of Curvature

Another way of estimating the effective earth radius factor is by using the average radius of curvature method described in [1]. The first step in the method is to compute the average radius of curvature over the signal propagation path

ρavg=1ha−ht∫hthaρdh=Hb10−6Nscosψge(ha−htHb)−1ha−htHb

where the integral spans the range from the radar altitude (ha) to the target altitude (ht).

The constants in the equation where

  • ht is the altitude of the target, specified by the ht argument.

  • ha is the altitude of the radar, specified by the ha argument.

  • hb is the altitude of the convergence point or breakpoint, specified by the altbp argument.

  • Nb is the refractivity measure (in N-units) at the convergence point or breakpoint specified by the npb argument.

  • Ns is the refractivity measure (in N-units) at the surface.

Altitudes are with respect to mean sea level. The constant Hb is computed from

Hb=hb−htlnNtNb

Then, the effective earth radius factor is computed from the average radius of curvature using

k=11−Reρavg

Refractivity Measure and N-Units

The refractivity measure, N, is related to the index of refraction, n by:

n=1+10−6N

10-6N represents the deviation of the index of refraction from the index of refraction of free space. N is expressed in N-units.

References

[1] Doerry, Armin. W. "Earth Curvature and Atmospheric Refraction Effects on Radar Signal Propagation", Sandia National Laboratories, SAND2012-10690, January 2013.

[2] Long, Maurice W. Radar Reflectivity of Land and Sea, 2nd Ed. Artech House, 2001.

[3] Mahafza, Bassem R. Radar Signal Analysis and Processing Using MATLAB, CRC Press, 2009.

[4] Skolnik, Merrill I. Introduction to Radar Systems, Third edition, McGraw-Hill, 2001.

[5] Ward, James. "Space-Time Adaptive Processing for Airborne Radar", Lincoln Lab Technical Report, 1994.

Extended Capabilities

See Also

| |

Introduced in R2011b

Phased Array System Toolbox Documentation

Support