runperf

Run set of tests for performance measurement

collapse all in page

Syntax

results = runperf
results = runperf(tests)
results = runperf(tests,Name,Value)

Description

results = runperf runs all the tests in your current folder for performance measurements and returns an array of matlab.perftest.TimeResult objects. Each element in results corresponds to an element in the test suite.

The performance test framework runs the tests using a variable number of measurements to reach a sample mean with a 0.05 relative margin of error within a 0.95 confidence level. It runs the tests four times to warm up the code, and then between 4 and 256 times to collect measurements that meet the statistical objectives. If the sample mean does not meet the 0.05 relative margin of error within a 0.95 confidence level after 256 test runs, the performance test framework stops running the test and displays a warning. In this case, the matlab.perftest.TimeResult object contains information for the 4 warm-up runs and 256 measurement runs.

The runperf function provides a simple way to run a collection of tests as a performance experiment.

example

results = runperf(tests) runs a specified set of tests.

example

results = runperf(tests,Name,Value) runs a set of tests with additional options specified by one or more Name,Value pair arguments.

Examples

collapse all

In your current working folder, create a script-based test, onesTest.m, that uses three different methods to initialize a 1000-by-1500 matrix of ones.

rows = 1000;
cols = 1500;

%% Ones Function
X = ones(rows,cols);

%% Loop Assignment Without Preallocation
for r = 1:rows
    for c = 1:cols
        X(r,c) = 1;
    end
end

%% Loop Assignment With Preallocation
X = zeros(rows,cols);
for r = 1:rows
    for c = 1:cols
        X(r,c) = 1;
    end
end

Run the script as a performance test. Your results might vary.

results = runperf('onesTest');
Running onesTest
.......... .......... .......... .......... ..........
.......... .......... .......... .......... ....
Done onesTest
__________

Display the results. The results variable is a 1-by-3 TimeResult array. Each element in the array corresponds to one of the tests defined in the code section in onesTest.m.

results
results = 

  1×3 TimeResult array with properties:

    Name
    Valid
    Samples
    TestActivity

Totals:
   3 Valid, 0 Invalid.
   4.4113 seconds testing time.

Display the measurement results for the second test, which loops the assignment without preallocation.

results(2)
ans = 

  TimeResult with properties:

            Name: 'onesTest/LoopAssignmentWithoutPreallocation'
           Valid: 1
         Samples: [4×7 table]
    TestActivity: [8×12 table]

Totals:
   1 Valid, 0 Invalid.
   3.1462 seconds testing time.

Display the complete table of test measurements.

results(2).TestActivity
results(2).TestActivity

ans =

  8×12 table

                       Name                        Passed    Failed    Incomplete    MeasuredTime    Objective         Timestamp             Host        Platform                     Version                                 TestResult                          RunIdentifier            
    ___________________________________________    ______    ______    __________    ____________    _________    ____________________    ___________    ________    __________________________________________    ________________________________    ____________________________________

    onesTest/LoopAssignmentWithoutPreallocation    true      false       false         0.39586        warmup      24-Jun-2019 16:50:25    MY-HOSTNAME     win64      9.7.0.1141441 (R2019b) Prerelease Update 2    [1×1 matlab.unittest.TestResult]    ab95d893-a080-4e98-9297-df697882b09d
    onesTest/LoopAssignmentWithoutPreallocation    true      false       false         0.38351        warmup      24-Jun-2019 16:50:25    MY-HOSTNAME     win64      9.7.0.1141441 (R2019b) Prerelease Update 2    [1×1 matlab.unittest.TestResult]    ab95d893-a080-4e98-9297-df697882b09d
    onesTest/LoopAssignmentWithoutPreallocation    true      false       false         0.37995        warmup      24-Jun-2019 16:50:25    MY-HOSTNAME     win64      9.7.0.1141441 (R2019b) Prerelease Update 2    [1×1 matlab.unittest.TestResult]    ab95d893-a080-4e98-9297-df697882b09d
    onesTest/LoopAssignmentWithoutPreallocation    true      false       false         0.38603        warmup      24-Jun-2019 16:50:26    MY-HOSTNAME     win64      9.7.0.1141441 (R2019b) Prerelease Update 2    [1×1 matlab.unittest.TestResult]    ab95d893-a080-4e98-9297-df697882b09d
    onesTest/LoopAssignmentWithoutPreallocation    true      false       false         0.38388        sample      24-Jun-2019 16:50:26    MY-HOSTNAME     win64      9.7.0.1141441 (R2019b) Prerelease Update 2    [1×1 matlab.unittest.TestResult]    ab95d893-a080-4e98-9297-df697882b09d
    onesTest/LoopAssignmentWithoutPreallocation    true      false       false         0.39803        sample      24-Jun-2019 16:50:27    MY-HOSTNAME     win64      9.7.0.1141441 (R2019b) Prerelease Update 2    [1×1 matlab.unittest.TestResult]    ab95d893-a080-4e98-9297-df697882b09d
    onesTest/LoopAssignmentWithoutPreallocation    true      false       false         0.39742        sample      24-Jun-2019 16:50:27    MY-HOSTNAME     win64      9.7.0.1141441 (R2019b) Prerelease Update 2    [1×1 matlab.unittest.TestResult]    ab95d893-a080-4e98-9297-df697882b09d
    onesTest/LoopAssignmentWithoutPreallocation    true      false       false         0.37702        sample      24-Jun-2019 16:50:28    MY-HOSTNAME     win64      9.7.0.1141441 (R2019b) Prerelease Update 2    [1×1 matlab.unittest.TestResult]    ab95d893-a080-4e98-9297-df697882b09d

The performance testing framework ran four warm-up runs, followed by four measurements runs (indicated as sample in the Objective column).

Display the mean measured time for the second test. To exclude data collected in the warm-up runs, use the values in the Samples field.

mean(results(2).Samples.MeasuredTime)
ans =

    0.3891

To compare the different initialization methods in the script, display the mean measured time for all the tests. Concatenate the values from the Samples field across the three elements in the results array. Then use varfun to group the table entries by name and compute the mean.

fullTable = vertcat(results.Samples);
varfun(@mean,fullTable,'InputVariables','MeasuredTime','GroupingVariables','Name')
ans =

  3×3 table

                       Name                        GroupCount    mean_MeasuredTime
    ___________________________________________    __________    _________________

    onesTest/OnesFunction                              65            0.0063079    
    onesTest/LoopAssignmentWithoutPreallocation         4              0.38909    
    onesTest/LoopAssignmentWithPreallocation           13             0.018792

In the example output, the ones function was the fastest way to initialize the matrix to ones. The performance testing framework made 65 measurement runs for this test. Your results might vary.

Open Script

In your current working folder, create a class-based test, preallocationTest.m, that compares different methods of preallocation.

classdef preallocationTest < matlab.perftest.TestCase
    methods(Test)
        function testOnes(testCase)
            x = ones(1,1e7);
        end
        
        function testIndexingWithVariable(testCase)
            id = 1:1e7;
            x(id) = 1;
        end
        
        function testIndexingOnLHS(testCase)
            x(1:1e7) = 1;
        end
        
        function testForLoop(testCase)
            for i=1:1e7
                x(i) = 1;
            end
        end
        
    end
end

The measurement boundary for the preallocationTest class is the test method. The time measurement for each test method includes all the code in method. For information on designating measurement boundaries, see the startMeasuring and stopMeasuring methods of matlab.perftest.TestCase.

Run performance tests for all the elements that contain 'Indexing' in the name. Your results might vary, and you might see a warning if runperf doesn't meet statistical objectives.

results = runperf('preallocationTest','Name','*Indexing*')

Running preallocationTest
.......... .......... .......
Done preallocationTest
__________


results = 

  1×2 TimeResult array with properties:

    Name
    Valid
    Samples
    TestActivity

Totals:
   2 Valid, 0 Invalid.
   2.4858 seconds testing time.

Display the mean measured time for each of the tests. Concatenate the values from the Samples field across the two elements in the results array. Then use varfun to group the table entries by name and compute the mean.

fullTable = vertcat(results.Samples);
varfun(@mean,fullTable,'InputVariables','MeasuredTime','GroupingVariables','Name')

ans =

  2×3 table

                       Name                       GroupCount    mean_MeasuredTime
    __________________________________________    __________    _________________

    preallocationTest/testIndexingWithVariable         6             0.16337     
    preallocationTest/testIndexingOnLHS               13            0.049936

Input Arguments

collapse all

Suite of tests specified as a string array, character vector, or cell array of character vectors. Each character vector in the cell array can contain the name of a test file, a test class, a test suite element name, a package containing your test classes, a folder containing your test files, or a project folder containing test files.

Example: runperf('ATestFile.m')

Example: runperf('ATestFile/aTest')

Example: runperf('mypackage.MyTestClass')

Example: runperf(pwd)

Example: runperf({'mypackage.MyTestClass','ATestFile.m',pwd,'mypackage.subpackage'})

Name-Value Pair Arguments

Specify optional comma-separated pairs of Name,Value arguments. Name is the argument name and Value is the corresponding value. Name must appear inside quotes. You can specify several name and value pair arguments in any order as Name1,Value1,...,NameN,ValueN.

Example: runperf(tests,'Name','productA_*') runs test elements with a name that starts with 'productA_'.

Name of the base folder that contains the file defining the test class, function, or script, specified as a string array, character vector, or cell array of character vectors. This argument filters TestSuite array elements. For the testing framework to include a test in the suite, the test element must be contained in one of the specified base folders. If none of the test elements matches a base folder, an empty test suite will be returned. Use the wildcard character * to match any number of characters. Use the question mark character ? to match a single character. For test files defined in packages, the base folder is the parent of the top-level package folder.

Indicator to run tests in subfolders, specified as false or true (0 or 1). By default the framework runs tests in the specified folders, but not in their subfolders.

Data Types: logical

Indicator to run tests in subpackages, specified as false or true (0 or 1). By default the framework runs tests in the specified packages, but not in their subpackages.

Data Types: logical

Name of the suite element, specified as a string array, character vector, or cell array of character vectors. This argument filters TestSuite array elements. For the testing framework to include a test in the suite, the Name property of the test element must match one of the specified names. If none of the test elements has a matching name, an empty test suite will be returned. Use the wildcard character * to match any number of characters. Use the question mark character ? to match a single character.

Name of a parameter used by the test suite element, specified as a string array, character vector, or cell array of character vectors. This argument filters TestSuite array elements. For the testing framework to include a test in the suite, the Parameterization property of the test element must contain at least one of the specified parameter names. If none of the test elements has a matching parameter name, an empty test suite will be returned. Use the wildcard character * to match any number of characters. Use the question mark character ? to match a single character.

Name of a property that defines a parameter used by the test suite element, specified as a string array, character vector, or cell array of character vectors. This argument filters TestSuite array elements. For the testing framework to include a test in the suite, the Parameterization property of the test element must contain at least one of the specified property names. If none of the test elements has a matching property name, an empty test suite will be returned. Use the wildcard character * to match any number of characters. Use the question mark character ? to match a single character.

Name of the test procedure, specified as a string array, character vector, or cell array of character vectors. This argument filters TestSuite array elements. For the testing framework to include a test in the suite, the ProcedureName property of the test element must match one of the specified procedure names. If none of the test elements has a matching procedure name, an empty test suite will be returned. Use the wildcard character * to match any number of characters. Use the question mark character ? to match a single character.

In a class-based test, the ProcedureName is the name of the test method. In a function-based test, it is the name of the local function that contains the test. In a script-based test, it is a name generated from the test section title. Unlike Name, the name of the test procedure does not include any class or package name or information about parameterization.

Name of the class that the test class derives from, specified as a string array, character vector, or cell array of character vectors. This argument filters TestSuite array elements. For the testing framework to include a test in the suite, the TestClass property of the test element must point to a test class that derives from one of the specified classes. If none of the test elements matches a class, an empty test suite will be returned.

Name of a test tag used by the test suite element, specified as a string array, character vector, or cell array of character vectors. This argument filters TestSuite array elements. For the testing framework to include a test in the suite, the Tags property of the test element must contain at least one of the specified tag names. If none of the test elements has a matching tag name, an empty test suite will be returned. Use the wildcard character * to match any number of characters. Use the question mark character ? to match a single character.

Tips

  • To customize the statistical objectives of the performance test, use the TimeExperiment class to construct and run the performance test.

Alternatives

To create a test suite explicitly, you can use the testsuite function or the matlab.unittest.TestSuite methods to create a suite. Then, you can run your performance test with the run method of your specified TimeExperiment.

See Also

| | |

Topics

Introduced in R2016a

MATLAB Documentation
Support