Execute stop command in HDL simulator from MATLAB
breakHdlSim() executes the stop command on the
HDL simulator on the local host. Use this function to:
Unblock the HDL simulator after it loads the simulation and before Simulink® starts the simulation.
Unblock the HDL simulator to add more signals to the waveform window when the simulation is in progress.
When you use breakHdlSim, you must specify the current connection
information to the HDL simulator.
breakHdlSim( executes the
portNumber)stop command in the HDL simulator on the port
portNumber.
breakHdlSim(
executes the portNumber,hostName)stop command in the HDL simulator on the host
hostName.
Stop the HDL simulator that is running on the local host.
>> breakHdlSim()
Stop the HDL simulator that is running on port 1234.
>> breakHdlSim('1234')Stop the HDL simulator that is running on port 1234 and host mylinux.
>> breakHdlSim('1234','mylinux')