Analyze and simulate referenced models, subsystems, or atomic subcharts in a model. Isolate a subsystem or a referenced model for testing by extracting it into a harness model. Monitor time-domain signals in your model during simulation, according to specifications that you assign to blocks. Construct signal verifications, and selectively apply them based on the simulation input group.
| Assertion | Check whether signal is zero |
| Check Dynamic Gap | Check that gap of possibly varying width occurs in range of signal's amplitudes |
| Check Dynamic Lower Bound | Check that one signal is always less than another signal |
| Check Dynamic Range | Check that signal falls inside range of amplitudes that varies from time step to time step |
| Check Dynamic Upper Bound | Check that one signal is always greater than another signal |
| Check Input Resolution | Check that input signal has specified resolution |
| Check Static Gap | Check that gap exists in signal's range of amplitudes |
| Check Static Lower Bound | Check that signal is greater than (or optionally equal to) static lower bound |
| Check Static Range | Check that signal falls inside fixed range of amplitudes |
| Check Static Upper Bound | Check that signal is less than (or optionally equal to) static upper bound |
Strategies for verifying functional units of your model, in isolation or in the context of a larger system.
Construct Simulation Tests by Using the Verification Manager
Simulink® Model Verification library blocks assess time-domain signals in your model, according to the specifications that you assign to the blocks.