Show the task execution data collected on a processor in the Simulation Data Inspector (SDI) application. For more information on visualizing tasks in the SDI application, see Task Visualization in Simulation Data Inspector.
Default:
off
Save task execution data to a file. For more information on recording task execution data, see Recording Tasks for Use in Simulation.
Default:
off
Overwrite the last task execution data file. For more information on recording task execution data, see Recording Tasks for Use in Simulation.
Default:
off
Choose the instrumentation method using which task execution data has to be collected from processor to display on SDI. For more information, see Kernel Instrumentation Profiler and Code Instrumentation Profiler.
Default:
Code
Choose the profiling duration for Kernel profiling.
If you select Kernel to specify Kernel profiling, set
Profiling duration to Unlimited
or Limited.
Unlimited — This option performs Kernel
profiling on the hardware and streams it to the host PC for an unlimited
time duration. Kernel profiling for an unlimited time duration on
hardware with low free disk storage or a model with high task rates can
result in packet loss of profiling data streamed from the hardware. This
packet loss depends on the free memory available on the host PC on which
you run MATLAB.
Limited — This option performs Kernel
profiling on the hardware and streams it to host PC for a limited time
duration. Kernel profiling for a limited time duration on hardware does
not result in packet loss of profiling data streamed from hardware. The
maximum time duration for limited Kernel profiling depends on the RAM
and free disk storage available on the hardware board on which Kernel
profiling is performed.
Default:
Unlimited