Frequency of the master datapath to the interconnect controller in MHz.
Default:
200
Data width of master datapath to interconnect controller in bits.
Default:
64
Specify depth of data FIFO, in units of bursts. When the writer has no buffers to write to, the FIFO can absorb data until a buffer becomes available. This value is the maximum number of bursts that can be buffered before data gets dropped.
Default:
12
Specify a number that asserts a backpressure signal from the channel to the data source. To avoid dropping data, set a high watermark, allowing the data producer enough time to react to backpressure. This number must be smaller than the FIFO depth.
Default:
8