I/O and state data for blocks
probe
probe s:b
probe modelName s:b
probe gcb
probe level level-type
p
probe sets the Simulink®
debugger to interactive probe mode. In this mode, the debugger displays the I/O of a
selected block. To exit interactive probe mode, enter a debugger command or press the
Enter key.
probe
displays the I/O of the block whose system index is s:bs and
block index is b.
probe
displays the I/O of the block system index is modelName s:bs and block
index is b in the modelName
model.
probe gcb displays the I/O of the currently selected
block.
probe level sets the
verbosity level for level-type probe, trace, and
dis. If level-type is
io, the debugger displays block I/O. If
level-type is all (default), the
debugger displays all information for the current state of a block, including inputs and
outputs, states, and zero crossings.
p is the short form of the command.
Display I/O for the currently selected block Out2 in
the model vdp using the Simulink debugger.
In the MATLAB Command Window, enter:
sldebug 'vdp'
The MATLAB command prompt >> changes to the Simulink debugger prompt (sldebug @0): >>.
Enter:
probe gcb
The MATLAB Command Window displays:
probe: Data of 0:3 Outport block 'vdp/Out2': U1 = [0]