Goto Tag Visibility

Define scope of Goto block tag

expand all in page
  • Library:

  • Simulink / Signal Routing

  • Goto Tag Visibility block

Description

The Goto Tag Visibility block defines the accessibility of Goto block tags that have scoped visibility. The value you specify for the Goto tag block parameter is accessible by From blocks in the same subsystem that contains the Goto Tag Visibility block and in subsystems below it in the model hierarchy.

A Goto Tag Visibility block is required for Goto blocks whose Tag Visibility parameter value is scoped. No Goto Tag Visibility block is needed if the tag visibility is either local or global. The block shows the tag name enclosed in braces ({}).

Note

A scoped Goto block in a masked system is visible only in that subsystem and in the nonvirtual subsystems it contains. Simulink® generates an error if you run or update a diagram that has a Goto Tag Visibility block at a lower level in the block diagram than the corresponding scoped Goto block in the masked subsystem.

Parameters

expand all

The Goto block tag whose visibility is defined by the location of this block. From and Goto blocks using the specified tag must be in the same subsystem or at any level in the model hierarchy below the Goto Tag Visibility block that does not entail crossing a nonvirtual subsystem boundary, in other words, the boundary of an atomic, conditionally executed, or function-call subsystem or a model reference. A scoped tag name is enclosed in braces ({}).

Tip

If you use multiple From and Goto Tag Visibility blocks to refer to the same Goto tag, you can simultaneously rename the tag in all of the blocks. Use the Rename All button in the Goto block dialog box.

Model Examples

Signal Routing with the From, Goto, and Goto Tag Visibility Blocks

Signal Routing with the From, Goto, and Goto Tag Visibility Blocks

Use the From, Goto, and Goto Tag Visibility blocks to route signals in your model.

Open Model

Block Characteristics

Data Types

Boolean | bus | double | enumerated | fixed point | integer | single

Direct Feedthrough

no

Multidimensional Signals

no

Variable-Size Signals

no

Zero-Crossing Detection

no

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

PLC Code Generation
Generate Structured Text code using Simulink® PLC Coder™.

Fixed-Point Conversion
Design and simulate fixed-point systems using Fixed-Point Designer™.

See Also

|

Topics

Introduced before R2006a

Simulink Documentation

Support