Set the sample time of an output port that inherits its sample time from the port to which it is connected
No
C, C++
#define MDL_SET_OUTPUT_PORT_SAMPLE_TIME
void mdlSetOutputPortSampleTime(SimStruct *S, int_T port,
real_T sampleTime, real_T offsetTime)
S SimStruct representing an S-Function block.
port Index of a port.
sampleTime Inherited sample time for port.
offsetTime Inherited offset time for port.
The Simulink® engine calls this method with the sample time
that port inherits from the port to which it is
connected.
For C MEX S-functions, if the inherited sample time is acceptable,
this method should set the sample time of port to
the inherited sample time and offset time, using ssSetOutputPortSampleTimessSetOutputPortOffsetTime. If the sample
time is unacceptable, this method generates an error via ssSetErrorStatus. This method is only
valid for simulation, and must be enclosed in a #if defined(MATLAB_MEX_FILE) statement.
This method can set the sample time of any other input or output
port whose sample time derives from the sample time of port,
using ssSetInputPortSampleTime or ssSetOutputPortSampleTime in
C MEX S-functions.
Normally, sample times are propagated forward; however, if sources feeding this block have inherited sample times, the engine might choose to back-propagate known sample times to this block. When back-propagating sample times, this method is called in succession for all inherited output port signals.
See mdlSetInputPortSampleTime
ssSetErrorStatus, ssSetInputPortSampleTime, ssSetOutputPortSampleTime, mdlSetInputPortSampleTime, SetOutputPortSampleTime