Test device vendor and type

Description

Select the manufacturer and type of the hardware to use to test the code generated from the model.

Category: Hardware Implementation

Settings

Default: Intel, x86–64 (Windows64)

AMD
ARM Compatible
Altera
Analog Devices
Atmel
Freescale
Infineon
Intel
Microchip
NXP
Renesas
STMicroelectronics
Texas Instruments
ASIC/FPGA
Custom Processor

AMD^® options:

Athlon 64
K5/K6/Athlon
x86–32 (Windows 32)
x86–64 (Linux 64)
x86–64 (macOS)
x86–64 (Windows64)

ARM^® options:

ARM 10
ARM 11
ARM 7
ARM 8
ARM 9
ARM Cortex-A
ARM Cortex-M
ARM Cortex-R
ARM Cortex
ARM 64-bit (LP64)
ARM 64-bit (LLP64)

Altera^® options:

SoC (ARM CortexA)

Analog Devices^® options:

ADSP–CM40x (ARM Cortex-M)
Blackfin
SHARC
TigerSHARC

Atmel^® options:

AVR
AVR (32-bit)
AVR (8-bit)

Freescale™ options:

32-bit PowerPC
68332
68HC08
68HC11
ColdFire
DSP563xx (16-bit mode)
HC(S)12
MPC52xx
MPC5500
MPC55xx
MPC5xx
MPC7xxx
MPC82xx
MPC83xx
MPC85xx
MPC86xx
MPC8xx
S08
S12x
StarCore

Infineon^® options:

C16x, XC16x
TriCore

Intel^® options:

x86–32 (Windows32)
x86–64 (Linux 64)
x86–64 (macOS)
x86–64 (Windows64)

Microchip options:

PIC18
dsPIC

NXP options:

Cortex—M0/M0+
Cortex—M3
Cortex—M4

Renesas^® options:

M16C
M32C
R8C/Tiny
RH850
RL78
RX
RZ
SH-2/3/4
V850

STMicroelectronics^®:

ST10/Super10

Texas Instruments™ options:

C2000
C5000
C6000
MSP430
Stellaris Cortex—M3
TMS470
TMS570 Cortex—R4

ASIC/FPGA options:

ASIC/FPGA

Tips

Before you select the device type, select the device vendor.

Selecting a device type specifies the hardware device to define system constraints:

Default hardware properties appear as the initial values.
You cannot change parameters with only one possible value.
Parameters with more than one possible value provide a list of valid values.

The following table lists values for each device type.

Key:	float and double (not listed) always equal 32 and 64, respectively
	Round to = Signed integer division rounds to
	Shift right = Shift right on a signed integer as arithmetic shift
	Long long = Support long long
Device vendor / Device type	Number of bits									Largest atomic size		Byte ordering	Round to	Shift right	Long long
Device vendor / Device type	char	short	int	long	long long	native	pointer	size_t	ptrdiff_t	int	float	Byte ordering	Round to	Shift right	Long long
`AMD`
`Athlon 64`	8	16	32	64	64	64	64	64	64	Char	None	Little Endian	Zero	✓	□
`K5/K6/Athlon`	8	16	32	32	64	32	32	32	32	Char	None	Little Endian	Zero	✓	□
`x86–32 (Windows32)`	8	16	32	32	64	32	32	32	32	Char	Float	Little Endian	Zero	✓	□
`x86–64 (Linux 64)`	8	16	32	64	64	64	64	64	64	Char	Float	Little Endian	Zero	✓	□
`x86–64 (macOS)`	8	16	32	64	64	64	64	64	64	Char	Float	Little Endian	Zero	✓	□
`x86–64 (Windows64)`	8	16	32	32	64	64	64	64	64	Char	Float	Little Endian	Zero	✓	□
`ARM Compatible`
`ARM 7/8/9/10`	8	16	32	32	64	32	32	32	32	Long	Float	Little Endian	Zero	✓	□
`ARM 11`	8	16	32	32	64	32	32	32	32	Long	Double	Little Endian	Zero	✓	□
`ARM Cortex`	8	16	32	32	64	32	32	32	32	Long	Double	Little Endian	Zero	✓	□
`ARM 64-bit (LP64)`	8	16	32	64	64	64	64	64	64	Long	Double	Little Endian	Zero	✓	✓
`ARM 64-bit (LLP64)`	8	16	32	32	64	64	64	64	64	Long	Double	Little Endian	Zero	✓	✓
`Altera`
`SoC (ARM Cortex A)`	8	16	32	32	64	32	32	32	32	Char	None	Little Endian	Zero	✓	□
`Analog Devices`
`ADSP-CM40x(ARM Cortex-M)`	8	16	32	32	64	32	32	32	32	Long	Double	Little Endian	Zero	✓	□
`Blackfin`	8	16	32	32	64	32	32	32	32	Long	Double	Little Endian	Zero	✓	□
`SHARC`	32	32	32	32	64	32	32	32	32	Long	Double	Big Endian	Zero	✓	□
`TigerSHARC`	32	32	32	32	64	32	32	32	32	Long	Double	Little Endian	Zero	✓	□
`Atmel`
`AVR`	8	16	16	32	64	8	16	16	16	Char	None	Little Endian	Zero	✓	□
`AVR (32-bit)`	8	16	32	32	64	32	32	32	32	Char	None	Little Endian	Zero	✓	□
`AVR (8-bit)`	8	16	16	32	64	16	16	16	16	Char	None	Little Endian	Zero	✓	□
`Freescale`
`32-bit PowerPC`	8	16	32	32	64	32	32	32	32	Long	Double	Big Endian	Zero	✓	□
`68332`	8	16	32	32	64	32	32	32	32	Char	None	Big Endian	Zero	✓	□
`68HC08`	8	16	16	32	64	8	8	16	8	Char	None	Big Endian	Zero	✓	□
`68HC11`	8	16	16	32	64	8	8	16	16	Char	None	Big Endian	Zero	✓	□
`ColdFire`	8	16	32	32	64	32	32	32	32	Char	None	Big Endian	Zero	✓	□
`DSP563xx (16-bit mode)`	8	16	16	32	64	16	16	16	16	Char	None	Little Endian	Zero	✓	□
`DSP5685x`	8	16	16	32	64	16	16	16	16	Char	Float	Little Endian	Zero	✓	□
`HC(S)12`	8	16	16	32	64	16	16	16	16	Char	None	Big Endian	Zero	✓	□
`MPC52xx, MPC5500, MPC55xx, MPC5xx, PC5xx, MPC7xxx, MPC82xx, MPC83xx, MPC86xx, MPC8xx`	8	16	32	32	64	32	32	32	32	Long	None	Big Endian	Zero	✓	□
`MPC85xx`	8	16	32	32	64	32	32	32	32	Long	Double	Big Endian	Zero	✓	□
`S08`	8	16	16	32	64	16	16	16	16	Char	None	Big Endian	Zero	✓	□
`S12x`	8	16	16	32	64	16	16	16	16	Char	None	Big Endian	Zero	✓	□
`StarCore`	8	16	32	32	64	32	32	32	32	Char	None	Little Endian	Zero	✓	□
`Infineon`
`C16x, XC16x`	8	16	16	32	64	16	16	16	16	Char	None	Little Endian	Zero	✓	□
`TriCore`	8	16	32	32	64	32	32	32	32	Char	None	Little Endian	Zero	✓	□
`Intel`
`x86–32 (Windows32)`	8	16	32	32	64	32	32	32	32	Char	Float	Little Endian	Zero	✓	□
`x86–64 (Linux 64)`	8	16	32	64	64	64	64	64	64	Char	Float	Little Endian	Zero	✓	□
`x86–64 (macOS)`	8	16	32	64	64	64	64	64	64	Char	Float	Little Endian	Zero	✓	□
`x86–64 (Windows64)`	8	16	32	32	64	64	64	64	64	Char	Float	Little Endian	Zero	✓	□
`Microchip`
`PIC18`	8	16	16	32	64	8	8	24	24	Char	None	Little Endian	Zero	✓	□
`dsPIC`	8	16	16	32	64	16	16	16	16	Char	None	Little Endian	Zero	✓	□
`NXP`
`Cortex—M0/M0+`	8	16	32	32	64	32	32	32	32	Long	Double	Little Endian	Zero	✓	□
`Cortex—M3`	8	16	32	32	64	32	32	32	32	Long	Double	Little Endian	Zero	✓	□
`Cortex—M4`	8	16	32	32	64	32	32	32	32	Long	Double	Little Endian	Zero	✓	□
`Renesas`
`M16C`	8	16	16	32	64	16	16	16	16	Char	None	Little Endian	Zero	✓	□
`M32C`	8	16	16	32	64	16	16	16	16	Char	None	Little Endian	Zero	✓	□
`R8C/Tiny`	8	16	16	32	64	16	16	16	16	Char	None	Little Endian	Zero	✓	□
`RH850`	8	16	32	32	64	32	32	32	32	Char	None	Little Endian	Zero	✓	□
`RL78`	8	16	16	32	64	16	16	16	16	Char	None	Little Endian	Zero	✓	□
`RX`	8	16	32	32	64	32	32	32	32	Char	None	Little Endian	Zero	✓	□
`RZ`	8	16	32	32	64	32	32	32	32	Long	Double	Little Endian	Zero	✓	□
`SH-2/3/4`	8	16	32	32	64	32	32	32	32	Char	None	Big Endian	Zero	✓	□
`V850`	8	16	32	32	64	32	32	32	32	Char	None	Little Endian	Zero	✓	□
`STMicroelectronics`
`ST10/Super10`	8	16	16	32	64	16	16	16	16	Char	None	Little Endian	Zero	✓	□
`Texas Instruments`
`C2000`	16	16	16	32	64	16	32	16	16	Int	None	Little Endian	Zero	✓	□
`C5000`	16	16	16	32	64	16	16	16	16	Int	None	Big Endian	Zero	✓	□
`C6000`	8	16	32	40	64	32	32	32	32	Int	None	Little Endian	Zero	✓	□
`MSP430`	8	16	16	32	64	16	16	16	16	Char	None	Little Endian	Zero	✓	□
`Stellaris Cortex—M3`	8	16	32	32	6	32	32	32	32	Long	Double	Little Endian	Zero	✓	□
`TMS470`	8	16	32	32	64	32	32	32	32	Long	Double	Little Endian	Zero	✓	□
`TMS570 Cortex—R4`	8	16	32	32	64	32	32	32	32	Long	Double	Big Endian	Zero	✓	□
`ASIC/FPGA`
`ASIC/FPGA`	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA

If your hardware does not match one of the listed types, select Custom.
The Device vendor and Device type fields share the command-line parameter TargetHWDeviceType. When specifying this parameter at the command line, separate the device vendor and device type values by using the characters ->. For example: 'Intel->x86-64 (Linux 64)'.
If you have a Simulink^® Coder™ license and you want to add Device vendor and Device type values to the default set, see Register New Hardware Devices (Simulink Coder).

Dependencies

The Device vendor and Device type parameter values reflect available device support for the selected hardware board.

Menu options that are available depend on the Device vendor parameter setting.

With the exception of device vendor ASIC/FPGA, selecting a device type sets the following parameters:

Number of bits: char
Number of bits: short
Number of bits: int
Number of bits: long
Number of bits: long long
Number of bits: float
Number of bits: double
Number of bits: native
Number of bits: pointer
Number of bits: size_t
Number of bits: ptrdiff_t
Largest atomic size: integer
Largest atomic size: floating-point
Byte ordering
Signed integer division rounds to
Shift right on a signed integer as arithmetic shift
Support long long

Whether you can modify the value of a device-specific parameter varies according to device type.

Command-Line Information

Parameter: TargetHWDeviceType

Type: character vector

Value: any valid value (see tips)

Default:

'Intel->x86–64
                        (Windows64)'

Recommended Settings

Application	Setting
Debugging	No impact
Traceability	No impact
Efficiency	No impact
Safety precaution	No impact when Test hardware is the same as production hardware is selected. If it is not selected, no recommendation.

Documentation