Time Stamp a ROS Message Using Current Time in Simulink

This example shows how to time stamp a ROS message with the current system time of your computer. Use the Current Time block and assign the output to the std_msgs/Header message in the Stamp field. Publish the message on a desired topic.

Connect to a ROS network.

rosinit

Launching ROS Core...
..................Done in 1.0509 seconds.
Initializing ROS master on http://192.168.0.10:55754.
Initializing global node /matlab_global_node_51971 with NodeURI http://bat6315glnxa64:34759/

Open the Simulink model provided with this example. The model uses a Bus Assignment block to add the Current Time output to the Stamp field of the ROS message.

open_system('current_time_stamp_message.slx')

Run the model. The Publish block should publish the Header message with the current system time.

sim('current_time_stamp_message.slx')

Shut down the ROS network.

rosshutdown

Shutting down global node /matlab_global_node_51971 with NodeURI http://bat6315glnxa64:34759/
Shutting down ROS master on http://192.168.0.10:55754.
....