The Simulink® PLC Coder™ product is tested with these IDE platforms:
3S-Smart Software Solutions CODESYS Version 2.3 or 3.3 or 3.5 (SP4 or later)
B&R Automation Studio® 3.0 or 4.0
Beckhoff® TwinCAT® 2.11 or 3
PHOENIX CONTACT Software MULTIPROG® 5.0 or 5.50.
PHOENIX CONTACT Software GmbH was previously called KW-Software GmbH. The Simulink PLC Coder software supports only the English version of MULTIPROG target IDE.
OMRON® Sysmac® Studio Version 1.04, 1.05, 1.09 or 1.12
Phoenix Contact® PC WORX™ 6.0
The Simulink PLC Coder software supports only the English version of Phoenix Contact PC WORX target IDE.
Rexroth IndraWorks version 13V12 IDE
Rockwell Automation® RSLogix™ 5000 Series Version 17, 18, 19 or 20 and Rockwell Studio 5000 Logix Designer Version 21 or 24
Simulink PLC Coder can generate code for Add-On instructions (AOIs) and routine code. The software supports automatic import and verification of generated code only for the RSLogix IDEs and not the Studio 5000 IDE.
Siemens® SIMATIC® STEP® 7 Version 5.3, 5.4, or 5.5
The Simulink PLC Coder software assumes that English systems use English S7 and that German systems use German S7.
Siemens TIA Portal V14
Generic
PLCopen XML
Selectron CAP1131 IDE
For a list of supported IDEs and platforms, see Supported IDEs at the MathWorks® website.
The Simulink PLC Coder product is tested with these IDE platforms:
3S-Smart Software Solutions CODESYS Version 3.5 SP6
Rockwell Automation RSLogix 5000 Series Version 20 and Rockwell Studio 5000 Logix Designer Version 24
PLCopen XML