Induction Machine Scalar Control

Induction machine V/f control

expand all in page
  • Library:

  • Simscape / Electrical / Control / Induction Machine Control

  • Induction Machine Scalar Control block

Description

The Induction Machine Scalar Control block implements an induction machine scalar, that is V/f or V/Hz, control structure. The diagram shows the open-loop V/f control structure that the block implements.

Equations

The Induction Machine Scalar Control block computes the magnitude of the stator voltage based on the reference frequency, fs*, as:

Vs*=(Vn−Vminfn−fmin)fs*,

where:

  • Vn is the rated voltage.

  • Vmin is the minimum voltage.

  • fn is the rated electrical frequency.

  • fmin is the minimum frequency.

The voltage components in the stationary reference frame are:

Vα=Vs*cos(2πfs*t)

and

Vβ=Vs*sin(2πfs*t).

The block obtains Vabc from Vα and Vβ by using an inverse Clarke transformation.

Ports

Input

expand all

Reference electrical frequency.

Example: Example

Data Types: single | double

Output

expand all

Reference phase voltages.

Example: Example

Data Types: single | double

Parameters

expand all

Nominal frequency.

Nominal voltage.

Lower bound for the voltage.

Time, in s, between consecutive block executions. During execution, the block produces outputs and, if appropriate, updates its internal state. For more information, see What Is Sample Time? and Specify Sample Time.

If this block is inside a triggered subsystem, inherit the sample time by setting this parameter to -1. If this block is in a continuous variable-step model, specify the sample time explicitly using a positive scalar.

Model Examples

Asynchronous Machine Scalar Control

Asynchronous Machine Scalar Control

Control the rotor speed in an asynchronous machine (ASM) drive using the scalar V/f control method. The converter transforms a reference speed to a reference electrical frequency. The controller generates reference voltages from the reference frequency by maintaining a constant voltage-to-frequency ratio through scalar V/f control.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

See Also

Blocks

Introduced in R2017b

Simscape Electrical Documentation

Support