Neutral
Implement common node in circuit
Library
Simscape / Electrical / Specialized Power Systems / Fundamental Blocks / Elements
Description
The Neutral block implements a common node with a specific node number. You can use this block to create a floating neutral or to interconnect two points without drawing a connection line.
Parameters
- Node number
Specify a number of the neutral node. If the Node number parameter is set to
0, the Neutral block makes a connection to ground. The node number is displayed next to the block icon. Default is10.
Examples
The power_neutral example
uses three Neutral blocks. One Neutral block is used to refer a Voltage Measurement block to the
ground (node 0).
See Also
Introduced before R2006a