Log and View Simulation Data for Selected Blocks
This example shows how you can set your model to log simulation data for selected blocks only and how to view simulation data using Simscape™ Results Explorer.
Open the Permanent Magnet DC Motor example model by typing
ssc_dcmotorin the MATLAB® Command Window. Double-click the DC Motor subsystem to open it.
Open the Configuration Parameters dialog box and then, in the left pane, select Simscape. This example model has data logging for the whole model enabled. To enable data logging on a block-by-block basis, set the Log simulation data parameter to
Use local settingsand click OK.
Select the blocks for data logging. Right-click the Rotational Electromechanical Converter block. From the context menu, select Simscape > Log simulation data .
After you select a block for data logging, a check mark appears in front of the Log simulation data option in the context menu for that block.
Right-click the Inertia block and select it for data logging, as described in the previous step.
Simulate the model. This creates a workspace variable named
simlog_ssc_dcmotor(as specified by the Workspace variable name parameter), which contains the simulation data for selected blocks only.To open the Simscape Results Explorer, right-click one of the blocks previously selected for data logging, for example, the Rotational Electromechanical Converter block. From the context menu, select Simscape > View simulation data > simlog_ssc_dcmotor.
Note
If you right-click a block that has not been selected for simulation data logging, for example, the Load Torque block, the View simulation data option is not available.
If you change the name of the log variable between simulation runs, the context menu lists the names of all the log variables associated with the block. For example, to compare data from two simulation runs, you can use different variable names (such as
simlog1andsimlog2). Open a Simscape Results Explorer window withsimlog1results, then unlink it from the session and open another window withsimlog2results. For more information, see About the Simscape Results Explorer.The Simscape Results Explorer window opens, with the
Rotational_Electromechanical_Converternode already selected in the left pane, and all the node plots for this block displayed in the right pane. You can see that it contains simulation data only for the two selected blocks, Rotational Electromechanical Converter and Inertia.