ssc_new
Create new Simscape model populated by required and commonly used blocks
Syntax
ssc_new
ssc_new('modelname')
ssc_new('modelname','domain')
Description
ssc_new creates a new Simscape™ model, with required and commonly used blocks already on the model canvas.
The model uses the recommended solver VariableStepAuto with the
absolute tolerance, AbsTol, set to 1e-3.
The function also turns on simulation data logging for the whole model, using the default
workspace variable name simlog and limiting the logged simulation
data to 10000 points. For more information, see Data Logging.
By default, the function uses the Simulink® default new model name untitled and the recommended
solver VariableStepAuto.
ssc_new('modelname') creates a new Simscape model with the specified name.
ssc_new('modelname','domain') creates a new
Simscape model with the specified name and with domain-specific blocks added to the
model canvas. Valid domains types are 'electrical',
'gas',
'hydraulic','isothermal_liquid',
'magnetic', 'moist_air',
'rotational', 'translational',
'thermal', 'thermal_liquid', and
'two_phase_fluid'.
Using the ssc_new to create a model is equivalent to opening the
corresponding Simscape template from the Simulink Start Page.
Examples
Create a Generic Simscape Model
To create a generic Simscape model, type:
ssc_new
The software creates a new untitled model, with the default solver set to
VariableStepAuto. The model contains a Solver
Configuration block, a Simulink-PS
Converter block, and a PS-Simulink
Converter block connected to a Scope block.
After using ssc_new, continue developing your model by copying
the blocks, as needed, and adding other blocks from the Simscape libraries. Use the
resources links at the bottom of the model window to open the main Simscape library
and access documentation topics that help you get started.
Create a Gas Model with Specified Name
To create a gas model, called pneumatic_actuator, type:
ssc_new('pneumatic_actuator','gas')
The software creates the following model.
After using ssc_new, continue developing your model by copying
the blocks, as needed, and adding other blocks from the Simscape libraries. Use the
resources links at the bottom of the model window to open the relevant block
libraries and access documentation topics that help you get started.