%% Simple ASCII Encoding/Decoding Loopback Test (With Baseboard Blocks)
% 
% This example model shows how a single floating point number can be 
% converted to ASCII and transmitted over a serial link. The sending serial 
% port and receiving serial port can be in the same system or in different 
% systems.
%
% To test this model:
% 
% # The target computer must have two legacy serial ports.
% # Connect legacy serial port 1 to legacy serial port 2 with a null modem cable.
% 
% This example is configured to use baseboard serial ports (legacy serial port 1 and legacy serial port 2). 
% You can also use legacy serial port 3 and legacy serial port 4 by changing the board setup in the 
% Baseboard blocks. Other serial blocks could be used in place of the 
% Baseboard blocks.
%% 
open_system(fullfile(matlabroot,'toolbox','slrealtime','examples','slrt_ex_serialbaseboardsimpleascii'));
%%
% *See Also*
% 
% * <docid:slrealtime_io_ref#f8-6098>
% * <docid:slrealtime_io_ref#f8-6140>
% 
% Copyright 2020 The MathWorks, Inc.
