lqgreg

Form linear-quadratic-Gaussian (LQG) regulator

Syntax

rlqg = lqgreg(kest,k) rlqg = lqgreg(kest,k,controls)

Description

rlqg = lqgreg(kest,k) returns the LQG regulator rlqg (a state-space model) given the Kalman estimator kest and the state-feedback gain matrix k. The same function handles both continuous- and discrete-time cases. Use consistent tools to design kest and k:

Continuous regulator for continuous plant: use lqr or lqry and kalman
Discrete regulator for discrete plant: use dlqr or lqry and kalman
Discrete regulator for continuous plant: use lqrd and kalmd

In discrete time, lqgreg produces the regulator

$u [n] = - K \hat{x} [n | n]$ when kest is the "current" Kalman estimator
$u [n] = - K \hat{x} [n | n - 1]$ when kest is the "delayed" Kalman estimator

For more information on Kalman estimators, see the kalman reference page.

rlqg = lqgreg(kest,k,controls) handles estimators that have access to additional deterministic known plant inputs u_d. The index vector controls then specifies which estimator inputs are the controls u, and the resulting LQG regulator rlqg has u_d and y as inputs (see the next figure).

Note

Always use positive feedback to connect the LQG regulator to the plant.

Examples

See the example LQG Regulation: Rolling Mill Case Study.

Algorithms

lqgreg forms the linear-quadratic-Gaussian (LQG) regulator by connecting the Kalman estimator designed with kalman and the optimal state-feedback gain designed with lqr, dlqr, or lqry. The LQG regulator minimizes some quadratic cost function that trades off regulation performance and control effort. This regulator is dynamic and relies on noisy output measurements to generate the regulating commands.

In continuous time, the LQG regulator generates the commands

$u = - K \hat{x}$

where $\hat{x}$ is the Kalman state estimate. The regulator state-space equations are

$\begin{array}{l} \dot{\hat{x}} = [A - L C - (B - L D) K] \hat{x} + L y \\ u = - K \hat{x} \end{array}$

where y is the vector of plant output measurements (see kalman for background and notation). The following diagram shows this dynamic regulator in relation to the plant.

In discrete time, you can form the LQG regulator using either the delayed state estimate $\hat{x} [n | n - 1]$ of x[n], based on measurements up to y[n–1], or the current state estimate $\hat{x} [n | n]$ , based on all available measurements including y[n]. While the regulator

$u [n] = - K \hat{x} [n | n - 1]$

is always well-defined, the current regulator

$u [n] = - K \hat{x} [n | n]$

is causal only when I-KMD is invertible (see kalman for the notation). In addition, practical implementations of the current regulator should allow for the processing time required to compute u[n] after the measurements y[n] become available (this amounts to a time delay in the feedback loop).

For a discrete-time plant with equations:

$\begin{matrix} x [n + 1] = A x [n] + B u [n] + G w [n] \\ y [n] = C x [n] + D u [n] + H w [n] + v [n] {Measurements} \end{matrix}$

connecting the "current" Kalman estimator to the LQR gain is optimal only when $E (w [n] v {[n]}^{'}) = 0$ and y[n] does not depend on w[n] (H = 0). If these conditions are not satisfied, compute the optimal LQG controller using lqg.

Documentation

lqgreg

Syntax

Description

Examples

Algorithms

See Also

Control System Toolbox Documentation

Support