At the command line, use looptune to tune
SISO or MIMO feedback loops using a loop-shaping approach. looptune tunes
a feedback loop to specified bandwidth and stability margins. In Control
System Tuner, use Quick Loop Tuning for loop shaping
of feedback loops.
Set Up Your Control System for Tuning with looptune
To use looptune, create a parameterized representation of
your controller and a numeric model of your plant.
Tune Control Systems in Simulink
At the command line, use systune or
looptune to automatically tune control systems modeled in
Simulink®.
Using Parallel Computing to Accelerate Tuning
Multiple optimization starts can improve control-system tuning results. If you have Parallel Computing Toolbox™, you can accelerate multi-start tuning strategies.
Quick Loop Tuning of Feedback Loops in Control System Tuner
Tune a control system to meet specified bandwidth and stability margins in Control System Tuner, without explicitly creating tuning goals that capture these requirements.
Decoupling Controller for a Distillation Column
Use looptune to decouple the two main feedback loops in a
distillation column.
Tuning of a Digital Motion Control System
Use looptune to tune a digital motion control system
modeled in Simulink.
PID Tuning for Setpoint Tracking vs. Disturbance Rejection
Explore trade-offs between setpoint tracking and disturbance
rejection when tuning PID controllers with systune.
Tuning of a Two-Loop Autopilot
Tune a two-loop autopilot controlling the pitch rate and vertical acceleration of an airframe.
Multi-Loop PI Control of a Robotic Arm
This example shows how to use looptune to tune a multi-loop controller for a 6-DOF robotic arm manipulator.
Structure of Control System for Tuning With looptune
looptune tunes the feedback loop illustrated
below to meet default requirements or requirements that you specify.
How Tuned Simulink Blocks Are Parameterized
Both Control System Tuner and the slTuner interface automatically
assign predefined parameterizations to certain Simulink blocks.
Mark Signals of Interest for Control System Analysis and Design
Analysis points allow you to access to internal signals, perform open-loop analysis, or specify requirements for controller tuning in systems modeled in either MATLAB® or Simulink.