Basic Printing
Print the vdp Model Using Default Settings
The default print settings produce good quality printed output for quickly capturing a model in printed form.
Open the
vdpmodel.
In the Simulink® Editor, on the Simulation tab, click Print.
In the Print Model dialog box, use the default settings. Click Print.
The output looks like this. The model, as it appears in the Simulink Editor, prints on a single page, using portrait orientation and not using a print frame.
Print a Subsystem Hierarchy
You can print levels in nested subsystems.
Open the
sldemo_enginewcmodel.
Open the Throttle & Manifold subsystem.
Open the Throttle subsystem.
In the Simulink Editor, on the Simulation tab, click Print.
In the Print Model dialog box, select Current system and above and click Print.
The printed output shows the Throttle subsystem (the current system) and the two levels above it in the subsystem hierarchy.