Select the diagnostic action to take if the Product block detects a singular matrix while inverting one of its inputs in matrix multiplication mode.
Category: Diagnostics
Default: none
noneSimulink® software takes no action.
warningSimulink software displays a warning.
errorSimulink software terminates the simulation and displays an error message.
For models referenced in Accelerator mode, Simulink ignores
the Division by singular matrix parameter setting
if you set it to a value other than None.
You can use the Model Advisor to identify referenced models for which Simulink changes configuration parameter settings during accelerated simulation.
In the Simulink Editor, in the Modeling tab, click Model Advisor, then click OK.
Select By Task.
Run the Check diagnostic settings ignored during accelerated model reference simulation check.
Parameter: CheckMatrixSingularityMsg |
Value: 'none' | 'warning' | 'error' |
Default: 'none' |
| Application | Setting |
|---|---|
| Debugging | No impact |
| Traceability | No impact |
| Efficiency | No impact |
| Safety precaution | error |