Signal Combiner

Compute sum of RF signals

expand all in page
  • Library:

  • RF Blockset / Circuit Envelope / Elements

  • Signal Combiner block

Description

The Signal Combiner block sums signals across each carrier frequency in the circuit envelope simulation environment.

Parameters

expand all

Select this parameter to ground and hide the negative terminals. To expose the negative terminals, clear this parameter. By exposing these terminals, you can connect them to other parts of your model.

Model Examples

Measuring Image Rejection Ratio in Receivers

Measuring Image Rejection Ratio in Receivers

Use the RF Blockset™ Circuit Envelope library to calculate the image rejection ratio (IRR) for high-side-injection in Weaver and Hartley receivers. The Weaver receiver shows the effect of phase offset on IRR, and the Hartley receiver shows a similar effect for resistor variation.

Carrier to Interference Performance of Weaver Receiver

Carrier to Interference Performance of Weaver Receiver

A classic superheterodyne architecture filters images prior to frequency conversion. In contrast, image-reject receivers remove the images at the output without filtering but are sensitive to phase offsets.

See Also

Introduced before R2006a

RF Blockset Documentation

Support