Connection Port
Connection port for RF subsystem
- Library:
RF Blockset / Equivalent Baseband / Input / Output Ports
RF Blockset / Circuit Envelope / Utilities
Description
The Connection Port block, placed inside a subsystem composed of RF Blockset™ Equivalent Baseband blocks, creates an open round physical modeling connector
port 
on the boundary of the subsystem. When it is connected to a connection
line, the port becomes solid 
.
You connect individual blocks and subsystems made of RF Blockset Equivalent Baseband blocks to one another with connection lines instead of
normal Simulink® signal lines. These blocks and subsystems are anchored at the open, round
physical modeling connector ports . Subsystems constructed out of RF Blockset Equivalent Baseband blocks automatically have such open round physical modeling
connector ports. You can add additional connector ports by adding Connection Port blocks to
your subsystem.
Parameters
Port number — Connector port number
1 (default) | scalar
This field labels the subsystem connector port created by this block. Multiple connector ports on the boundary of a single subsystem require different numbers as labels.
Port location on parent subsystem — Port location on the parent subsystem. Choices are:
left (default) | Right
Use this parameter to choose on which side of the parent subsystem boundary the Port is placed.