AGC

Automatically adjusts gain to maintain output waveform amplitude

expand all in page
  • Library:

  • SerDes Toolbox / Datapath Blocks

  • AGC block

Description

The AGC block applies an adaptive variable gain to the input waveform to achieve a desired RMS output voltage. Averaging the RMS voltage over a specified number of symbols, AGC performs automatic gain control (AGC) by increasing or decreasing the gain, or keeping the gain constant.

Ports

Input

expand all

Input baseband signal. The input signal can be a sample-by-sample signal specified as a scalar, or an impulse response vector signal.

Data Types: double

Output

expand all

Gain adjusted output signal. If the input signal is a sample-by-sample signal specified as a scalar, the output is also scalar. If the input signal is an impulse response vector signal, the output is also a vector.

Data Types: double

Parameters

expand all

AGC operating mode:

  • Off — AGC is bypassed, the input waveform remains unchanged.

  • On — AGC adjusts gain of input waveform to maintain Target RMS voltage in output waveform.

Programmatic Use

  • Use get_param(gcb,'Mode') to view the current AGC Mode.

  • Use set_param(gcb,'Mode',value) to set AGC to a specific Mode.

Desired RMS voltage of the output waveform, specified as a real scalar in the range [0.003, 10] in volts.

Programmatic Use

  • Use get_param(gcb,'TargetRMSVoltage') to view the current value of Target RMS voltage (V).

  • Use set_param(gcb,'TargetRMSVoltage',value) to set Target RMS voltage (V) to a specific value.

Data Types: double

Maximum allowed AGC gain, specified as a positive real scalar. Maximum gain provides a stable startup of the adaptive algorithm.

Programmatic Use

  • Use get_param(gcb,'MaxGain') to view the current value of Maximum gain.

  • Use set_param(gcb,'MaxGain',value) to set Maximum gain to a specific value.

Data Types: double

Averaging length, specified as a positive real integer. Averaging length defines the number of symbol over which the RMS calculation of the input signal is made.

Programmatic Use

  • Use get_param(gcb,'AveragingLength') to view the current value of Averaging length.

  • Use set_param(gcb,'AveragingLength',value) to set Averaging length to a specific value.

Data Types: double

IBIS-AMI parameters

Select to include Mode as a parameter in the IBIS-AMI file. If you deselect Mode, it is removed from the AMI files, effectively hard-coding Mode to its current value.

Select to include Target RMS voltage as a parameter in the IBIS-AMI file. If you deselect Target RMS voltage, it is removed from the AMI files, effectively hard-coding Target RMS voltage to its current value.

See Also

| |

Introduced in R2019a

SerDes Toolbox Documentation

Support