%% Noise Figure Testbench
% Use the |Noise Figure Testbench| block to verify the noise figure of an
% |Amplifier| block.
%%
% Open the model and change the noise figure of the amplifier block to 10
% dB. In the Noise Figure Testbench block, clear |Show Response spectrum|.

open_system('noise_figure_example.slx')

%%
% Run the model. You will see that the display shows a noise figure close
% to 10 dB.
%%
% 
% <<../noisefig_2.png>>
% 



%% 
% Copyright 2012 The MathWorks, Inc.