FM Demodulator Baseband

Demodulate using FM method

expand all in page
  • Library:

  • Communications Toolbox / Modulation / Analog Baseband Modulation

Description

The FM Demodulator Baseband block demodulates a complex input signal and returns a real output signal.

Ports

Input

expand all

Input signal, specified as a real scalar, vector, or matrix.

Data Types: double | single

Output

expand all

Output signal, returned as a real scalar, vector, or matrix. The data at this port has the same data type and size as the input signal.

Data Types: double | single

Parameters

expand all

Frequency deviation of the demodulator, in Hz, specified as a positive scalar. The system bandwidth is equal to twice the sum of the frequency deviation and the message bandwidth.

Type of simulation to run, specified as Code generation or Interpreted execution.

  • Code generation –– Simulate the model by using generated C code. The first time you run a simulation, Simulink® generates C code for the block. The C code is reused for subsequent simulations unless the model changes. This option requires additional startup time, but the speed of the subsequent simulations is faster than Interpreted execution.

  • Interpreted execution –– Simulate the model by using the MATLAB® interpreter. This option requires less startup time than the Code generation method, but the speed of subsequent simulations is slower. In this mode, you can debug the source code of the block.

Model Examples

FM Modulation and Demodulation

FM Modulation and Demodulation

The example, shows how the FM Modulator Baseband and FM Demodulator Baseband blocks are used to modulate and demodulate a sinusoidal signal.

Open Model

Block Characteristics

Data Types

double | single

Multidimensional Signals

no

Variable-Size Signals

no

Algorithms

Represent a frequency modulated passband signal, Y(t), as

Y(t)=Acos(2πfct+2πfΔ∫0tx(τ)dτ) ,

where A is the carrier amplitude, fc is the carrier frequency, x(τ) is the baseband input signal, and fΔ is the frequency deviation in Hz. The frequency deviation is the maximum shift from fc in one direction, assuming |x(t)| ≤ 1.

A baseband FM signal can be derived from the passband representation by downconverting it by fc such that

ys(t)=Y(t)e−j2πfct=A2[ej(2πfct+2πfΔ∫0tx(τ)dτ)+e−j(2πfct+2πfΔ∫0tx(τ)dτ)]e−j2πfct=A2[ej2πfΔ∫0tx(τ)dτ+e−j4πfct−j2πfΔ∫0tx(τ)dτ] .

Removing the component at -2fc from ys(t) leaves the baseband signal representation, y(t), which is expressed as

y(t)=A2ej2πfΔ∫0tx(τ)dτ.

The expression for y(t) is rewritten as

y(t)=A2ejϕ(t) ,

where ϕ(t)=2πfΔ∫0tx(τ)dτ, which implies that the input signal is a scaled version of the derivative of the phase, ϕ(t).

A baseband delay demodulator is used to recover the input signal from y(t).

A delayed and conjugated copy of the received signal is subtracted from the signal itself,

w(t)=A24ejϕ(t)e−jϕ(t−T)=A24ej[ϕ(t)−ϕ(t−T)] ,

where T is the sample period. In discrete terms, wn=w(nT), and

wn=A24ej[ϕn−ϕn−1] ,vn=ϕn−ϕn−1 .

The signal vn is the approximate derivative of ϕn, such that vn ≈ xn.

References

[1] Chakrabarti, I. H., and I, Hatai. “A New High-Performance Digital FM Modulator and Demodulator for Software-Defined Radio and Its FPGA Implementation.” International Journal of Reconfigurable Computing. Vol. 2011, No. 10.1155/2011, 2011, p. 10.

[2] Taub, Herbert, and Donald L. Schilling. Principles of Communication Systems. New York: McGraw-Hill, 1971, pp. 142–155.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

See Also

Blocks

Objects

Introduced in R2015a

Communications Toolbox Documentation
Support